Tool finder

Articles found: 10

Your can restrict your selection by using the other filters!

Reset

Consulting:
T (61)-02-8708 4900

Finger Joint Cutters 10/10

Product

Drawing

High Speed Steel [HS]
MEC

current tab: current tab: Article

Article

Machine / Application

finger joint machines
machines without cross-cutting device
For longitudinal joints in soft, hard and exotic woods, with a finger length of 10 mm

Design

Finger length of 10 mm
HS suitable for soft woods
HS Solid 34 suitable for knotty soft woods
HW suitable for hard and exotic woods

Advantages

HS Solid 34: high bending strength, compared to HS finger joint cutters the edge life is 1.5 - 2 times as long
topcoat 104: the edge life is 2 times as long compared to HS finger joint cutters

Notes

Showentries

	Ø D [mm]	B [mm]	b [mm]	Ø d [mm]	Z	Partition [mm]	Finger joint length [mm]	Number of finger joints [pc.]	nmax [min-1]	Remarks	Ident-No.	Comp./ Inqu.
Dimensions entered are not listed? Please contact our application consulting. available from stock available on short notice Delivery time on request
	160	28,6	26.6	50	2+2	3.8	10/10	7	8,000	HS	187376	\|
	160	28,6	26.6	50	2+2	3.8	10/10	7	8,000	HS, topcoat 104	187379	\|
	160	28,6	26.6	50	2+2	3.8	10/10	7	8,000	HS Solid 34	187380	\|
	160	28,6	26.6	50	2+2	3.8	10/10	7	8,000	HS Solid 34, topcoat 104	187377	\|
	160	28,6	26.6	50	2+2	3.8	10/10	7	8,000	HW	187378	\|
	250	28,6	26.6	50	3+3	3.8	10/10	7	6,000	HS	187382	\|
	250	28,6	26.6	50	3+3	3.8	10/10	7	6,000	HS, topcoat 104	187384	\|
	250	28,6	26.6	50	3+3	3.8	10/10	7	6,000	HS Solid 34	187386	\|
	250	28,6	26.6	50	3+3	3.8	10/10	7	6,000	HS Solid 34, topcoat 104	187383	\|
	250	28,6	26.6	50	3+3	3.8	10/10	7	6,000	HW	187385	\|

Show 1 to 10 of 10 entries