Directly to the tool

Tool finder

Workpiece material

Machine

Applications

Features

Cutting circle diameter

Cutting circle diameter (inch)

Cutting width

Bore diameter

Bore diameter (inch)

No. of teeth

Tooth configuration

Cutting material group

LEUCO product names

To the product names

Articles found: 10

Your can restrict your selection by using the other filters!

Reset

Selection via tool type

188148 - Gang-Rip Saw Blades HW "F"

Product

Drawing

  • Tungsten Carbide [HW]

Comp./ Inqu. |

Technical data

Description

Machine / Application

  • molders
  • gang-rip saws with one or two shafts
  • for precise ripping cuts in dry and planed soft woods

Design

  • tooth configuration: flat "F"
  • cutting material: HW HL Board 20
  • type A and C with staggered double keyways

Advantages

  • staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine

Notes

  • larger bore (max. Ø 100 mm) available for a surcharge
  • for cutting height > 50 mm use version with HW rakers
  • for inquiries / orders enclose specification sheet (see appendix)
FeatureValue
Ø D = Cutting circle diameter 200 [mm]
B = Cutting width 2,4 [mm]
b = Body thickness 1.6 [mm]
Ø d = Bore diameter 40 [mm]
Ø dmax = Maximum bore diameter 100 [mm]
Z = No. of teeth 20
Hook angle = Hook angle 20 [°]
Tooth geometry = Tooth configuration F
LEUCODUR = Cutting material HL Board 20
L = Delivery Status

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

Downloads